Updated by 2011-10-03
| Standard and title | Published | Replaces |
|
ISO 5459:2011 Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum-systems |
2011-08-15 | ISO 5459:1981 |
|
ISO 13385-1:2011 Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics |
2011-07-15 |
ISO 3599:1976 & ISO 6906:1984 |
|
ISO 13385-2:2011 Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 2: Calliper depth gauges; Design and metrological characteristics |
2011-07-15 |
ISO 3599:1976 & ISO 6906:1984 |
|
ISO 16610-21:2011 Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters |
2011-06-01 | ISO 11562:1996 |
|
ISO 10360-7:2011 Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 7: CMMs equipped with imaging probing systems |
2011-06-01 | None |
|
ISO 8015:2011 Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules |
2011-06-01 | ISO 8015:1985 |
|
ISO 14253-2:2011 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
2011-04-15 |
ISO/TS 14253-2: 1999 & ISO/TS 14253-2: 1999/Cor.1:2007 |
|
ISO 14253-3:2011 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 3: Guidelines for achieving agreements on measurement uncertainty statements |
2011-04-15 | ISO/TS 14253-3: 2002 |
|
ISO 25378:2011 Geometrical product specifications (GPS) — Characteristics and conditions — Definitions |
2011-04-01 | None |
|
ISO 12180-1:2011 Geometrical product specifications (GPS) — Cylindricity — Part 1: Vocabulary and parameters of cylindrical form |
2011-04-01 | ISO/TS 12180-1: 2003 |
|
ISO 12180-2:2011 Geometrical product specifications (GPS) — Cylindricity — Part 2: Specification operators |
2011-04-01 | ISO/TS 12180-2: 2003 |
|
ISO 12181-1:2011 Geometrical product specifications (GPS) — Roundness — Part 1: Vocabulary and parameters of roundness |
2011-04-01 | ISO/TS 12181-1: 2003 |
|
ISO 12181-2:2011 Geometrical product specifications (GPS) — Roundness — Part 2: Specification operators |
2011-04-01 | ISO/TS 12181-2: 2003 |
|
ISO 12780-1:2011 Geometrical product specifications (GPS) — Straightness — Part 1: Vocabulary and parameters of straightness |
2011-04-01 | ISO/TS 12780-1:2003 |
|
ISO 12780-2:2011 Geometrical product specifications (GPS) — Straightness — Part 2: Specification operators |
2011-04-01 | ISO/TS 12780-2: 2003 |
|
ISO 12781-1:2011 Geometrical product specifications (GPS) — Flatness — Part 1: Vocabulary and parameters of flatness |
2011-04-01 | ISO/TS 12781-1: 2003 |
|
ISO 12781-2:2011 Geometrical product specifications (GPS) — Flatness — Part 2: Specification operators |
2011-04-01 | ISO/TS 12781-2: 2003 |
|
ISO 3611:2010 Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics |
2010-11-01 | ISO 3611:1978 |
|
ISO ISO 10360-5:2010 Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 5: CMMs using single and multiple stylus contacting probing systems |
2010-09-15 |
ISO 10360-5:2000 & ISO/PAS 12868:2009 |
|
ISO/TS 16610-28:2010 Geometrical product specifications (GPS) — Filtration — Part 28: Profile filters: End effects |
2010-08-15 | None |
|
ISO/TS 16610-31:2010 Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters |
2010-08-15 | None |
|
ISO 25178-701:2010 Geometrical product specifications (GPS) — Surface texture: Areal — Part 701: Calibration and measurement standards for contact (stylus) instruments |
2010-06-22 | ISO 286-1:1988 |
|
ISO 25178-601:2010 Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments |
2010-06-22 | None |
|
ISO 25178-602:2010 Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments |
2010-06-22 | None |
|
ISO 286-2:2010 Geometrical product specifications (GPS) — ISO code system for tolerances of linear sizes — Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts |
2010-06-15 | ISO 286-1:1988 |
|
ISO 14253-4:2010 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 4: Background on functional limits and specification limits in decision rules |
2010-05-15 | None |
|
ISO 286-1:2010 Geometrical product specifications (GPS) — ISO code system for tolerances of linear sizes — Part 1: Basis of tolerances, deviations and fits |
2010-04-15 |
ISO 286-1:1988 & ISO 1829:1975 |
|
ISO 10579:2010 Geometrical Product Specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts |
2010-03-01 | ISO 10579:1993 |
|
ISO 25178-6:2010 Geometrical product specifications (GPS) — Surface texture: Areal — Part 6: Classification of methods for measuring surface texture |
2010-02-01 | None |
|
ISO/TR 23605:2009 Technical product specification (TPS) — Application guide — International model for national implementation |
2009-12-15 | None |
|
ISO 3040:2009 (Consolidated) Geometrical Product Specifications (GPS) — Dimensioning and tolerancing — Cones |
2009-12-01 | ISO 3040: 1990 |
|
ISO ISO 10360-2:2009 Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 2: CMMs used for measuring linear dimensions |
2009-12-01 | ISO 10360-2:2001 |
|
ISO/PAS 12868:2009 Geometrical product specification (GPS) — Coordinate measuring machines (CMM): Testing the performance of CMMs using single stylus contacting probing systems |
2009-12-01 | None |
|
ISO 4287:1997/Amd.1:2009 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters AMENDMENT 1: Peak count number |
2009-06-15 | None |
|
ISO/TS 16610-30:2009 Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts |
2009-03-15 | None |
|
ISO/TS 16610-32:2009 Geometrical product specifications (GPS) — Filtration — Part 32: Robust profile filters: Spline filters |
2009-03-15 | None |
|
ISO 463:2006 Technical Corrigendum 2:2009 Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges |
2009-01-15 | None |
|
ISO 8062-3:2007 Technical Corrigendum 1:2009 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
2009-01-15 | None |
|
ISO/TS 15530-4:2008 Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 4: Evaluating task-specific measurement uncertainty using simulation |
2008-06-01 | None |
|
ISO 5436-2:2001
Technical Corrigendum
2:2008 Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards |
2008-05-01 | None |
|
ISO 14978:2006 Technical Corrigendum1:2008 Geometrical product specifications (GPS) — General concepts and requirements for GPS measuring equipment |
2008-02-15 | None |
|
ISO 10135:2007 Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD) |
2007-11-15 | ISO 10135:1994 |
|
ISO/TS 14253-2:1999 Technical Corrigendum
1:2007 Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
2007-10-09 | None |
|
ISO/TS 17450-1:2005 Technical Corrigendum
1:2007 Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification |
2007-06-15 | None |
|
ISO 463:2006 Technical Corrigendum 1: 2007 Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges |
2007-06-01 | None |
|
ISO 8062-1:2007 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 1: Vocabulary |
2007-06-01 | ISO 8062:1994 |
|
ISO 8062-3:2007 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
2007-06-01 | ISO 8062:1994 |
|
ISO 10360-6:2001: Technical Corrigendum 1: 2007 Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6: Estimation of errors in computing Gaussian associated features |
2007-04-26 | None |
|
ISO 5436-2:2001 Technical Corrigendum 1: 2006 Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards |
2006-12-01 | None |
|
ISO/TS 16610-1:2006 Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts |
2006-11-01 | None |
|
ISO/TS 16610-20:2006 Geometrical product specifications (GPS) — Filtration — Part 20: Linear profile filters: Basic concepts |
2006-11-01 | None |
|
ISO/TS 16610-22:2006 Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters |
2006-11-01 | None |
|
ISO/TS 16610-29:2006 Geometrical product specifications (GPS) — Filtration — Part 29: Linear profile filters: Spline wavelets |
2006-11-01 | None |
|
ISO/TS 16610-40:2006 Geometrical product specifications (GPS) — Filtration — Part 40: Morphological profile filters: Basic concepts |
2006-11-01 | None |
|
ISO/TS 16610-41:2006 Geometrical product specifications (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters |
2006-11-01 | None |
|
ISO/TS 16610-49:2006 Geometrical product specifications (GPS) — Filtration — Part 49: Morphological profile filters: Scale space techniques |
2006-11-01 | None |
|
ISO/TS 23165:2006 Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty | 2006-07-15 | None |
|
ISO 14978:2006 Geometrical product specifications (GPS) — General concepts and requirements for GPS measuring equipment | 2006-07-01 | None |
|
ISO 463:2006 Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges | 2006-03-01 | ISO/R 463:1985 |
|
ISO 4287:1997 Technical Corrigendum 2:2005 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters | 2005-02-15 | None |
|
ISO/TS 17450-1:2005 Geometrical Product Specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification | 2005-02-01 | None |
|
ISO 1101:2004 Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out | 2004-12-15 | ISO 1101:1983 |
|
ISO/TR 16570:2004 Geometrical Product Specifications (GPS) — Linear and angular dimensioning and tolerancing: +/- limit specifications — Step dimensions, distances, angular sizes and radii | 2004-10-01 | None |
|
ISO/TS 15530-3:2004 Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or standards | 2004-03-01 | None |
|
ISO/TS 12180-1:2003 Geometrical Product Specifications (GPS) — Cylindricity — Part 1: Terms, definitions and parameters of cylindricity | 2003-12-01 | None |
|
ISO/TS 12180-2:2003 Geometrical Product Specifications (GPS) — Cylindricity — Part 2: Specification operators | 2003-12-01 | None |
|
ISO/TS 12181-1:2003 Geometrical Product Specifications (GPS) — Roundness — Part 1: Terms, definitions and parameters of roundness | 2003-12-01 | ISO 6318:1985 |
|
ISO/TS 12181-2:2003 Geometrical Product Specifications (GPS) — Roundness — Part 2: Specification operators | 2003-12-01 | None |
|
ISO/TS 12780-1:2003 Geometrical Product Specifications (GPS) — Straightness — Part 1: Terms, definitions and parameters of straightness | 2003-12-01 | None |
|
ISO/TS 12780-2:2003 Geometrical Product Specifications (GPS) — Straightness — Part 2: Specification operators | 2003-12-01 | None |
|
ISO/TS 12781-1:2003 Geometrical Product Specifications (GPS) — Flatness — Part 1: Terms, definitions and parameters of flatness | 2003-12-01 | None |
|
ISO/TS 12781-2:2003 Geometrical Product Specifications (GPS) — Flatness — Part 2: Specification operators | 2003-12-01 | None |
|
ISO 12179:2000/Technical Corrigendum .1:2003
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments | 2003-12-01 | None |
|
ISO/TR 16015:2003 Geometrical product specifications (GPS) — Systematic errors and contributions to measurement uncertainty of length measurements due to thermal influences | 2003-03-15 | None |
|
ISO 10360-1:2000/Technical Corrigendum 1:2002
Geometrical product specification (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 1: Vocabulary | 2002-11-15 | None |
|
ISO 10360-4:2000/Technical Corrigendum 1:2002
Geometrical product specification (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 4: CMMs used in scanning measuring mode | 2002-11-15 | None |
|
ISO/TS 17450-2:2002
Geometrical Product Specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators and uncertainties | 2002-10-15 | None |
|
ISO/TS 14253-3:2002
Geometrical product specification (GPS) — Inspection by 3: Guidelines for achieving agreements on measurement uncertainty statements | 2002-10-15 | None |
|
ISO 1:2002 Geometrical product specifications (GPS) - Standard reference temperature for geometrical product specification and verification | 2002-07-15 | ISO 1:1975 |
|
ISO 1302:2002 | 2002-02-01 | ISO 1302:1992 |
| ISO 5436-2:2001 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards | 2001-12-15 | |
| ISO 10360-2:2001 Geometrical Product Specifications (GPS) - Acceptance and reverification test for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring size | 2001-12-15 | ISO 10360-2:1994 |
| ISO 10360-6:2001 Geometrical Product Specifications (GPS) - Acceptance and reverification test for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features | 2001-12-15 | None |
| ISO 10360-5:2000 Geometrical Product Specifications (GPS) - Acceptance and reverification test for coordinate measuring machines (CMM) - Part 5: CMMs using multiple-stylus probing systems | 2000-12-15 | None |
| ISO 10360-1:2000Geometrical Product Specifications (GPS) - Acceptance and reverification test for coordinate measuring machines (CMM) - Part 1: Vocabulary | 2000-11-15 | None |
| ISO 10360-3:2000Geometrical Product Specifications (GPS) - Acceptance and reverification test for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis | 2000-03-15 | None |
| ISO 10360-4:2000Geometrical Product Specifications (GPS) - Acceptance and reverification test for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode | 2000-03-15 | None |
| ISO 12179:2000Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments | 2000-03-15 | None |
| ISO 5436-1:2000Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures | 2000-03-15 | ISO 5436:1985 |
| ISO/TS 14253-2:1999 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
1999-12-01 | None |
| ISO 14660-2:1999 Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature" |
1999-10-01 | None |
| ISO 14660-1:1999 Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions" |
1999-10-01 | None |
| ISO 3650:1998 Geometrical product specifications (GPS) - Length standards - Gauge blocks |
1998-12-15 | ISO 3650:1978 |
| ISO 5458:1998 Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing |
1998-12-15 | ISO 5458:1987 |
| ISO 13565-3:1998 Geometrical product specifications (GPS) - Surface texture: Profil method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve |
1998-11-15 | None |
| ISO 14253-1:1998 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or non-conformance with specifications |
1998-11-15 | None |
| ISO 2538:1998 Geometrical Product Specifications (GPS) - Series of angles and slopes on prisms |
1998-09-15 | ISO/R 2538:1974 |
| ISO 1119:1998 Geometrical Product Specifications (GPS) - Series of conical tapers and taper angles |
1998-09-15 | ISO 1119:1975 |
| ISO 8785:1998 Geometrical Product Specifications (GPS) - Surface imperfections - Terms, definitions and parameters |
1998-07-15 | None |
| ISO 13565-2:1996 Technical Corrigendum 1:1998Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 2: Height Characterization using the linear material ratio curve | 1998-06-15 | None |
| ISO 13565-1:1996 Technical Corrigendum 1:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions |
1998-06-15 | None |
| ISO 12085:1996 Technical Corrigendum 1:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters |
1998-06-15 | None |
| ISO 11562:1996 Technical Corrigendum 1:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters |
1998-06-15 | None |
| ISO 4288:1996 Technical Corrigendum 1:1998 Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture |
1998-06-15 | None |
| ISO 4287:1997 Technical Corrigendum 1:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters |
1998-06-15 | None |
| ISO 3274:1996 Technical Corrigendum 1:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact stylus instruments |
1998-06-01 | None |
| ISO 4287:1997Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters | 1997-04-01 | ISO 4287-1:1984 |
| ISO 13565-2:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 2: Height Characterization using the linear material ratio curve |
1996-12-01 | None |
| ISO 13565-1:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions |
1996-12-01 | None |
| ISO 11562:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters |
1996-12-01 | None |
| ISO 3274:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact stylus instruments |
1996-12-01 |
ISO 1880:1979 ISO 3274:1975 |
| ISO 12085:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters |
1996-08-15 | None |
|
ISO 4288:1996 Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture |
1996-08-15 | ISO 4288:1985 |